Research on machine vision based register control system used in chromatic printing machine

doi:10.3778/j.issn.1002-8331.2011.04.068

Computer Engineering and Applications ›› 2011, Vol. 47 ›› Issue (4): 242-244.DOI: 10.3778/j.issn.1002-8331.2011.04.068

• 工程与应用 • Previous Articles Next Articles

Research on machine vision based register control system used in chromatic printing machine

SHI Hui¹，YU Wenyong²

1.School of Mechanical and Electronic Engineering，Wuhan University of Technology，Wuhan 430070，China
2.State Key Lab of Digital Manufacturing Equipment & Technology，Huazhong University of Science and Technology，Wuhan 430074，China

Received:2009-06-01 Revised:2009-07-20 Online:2011-02-01 Published:2011-02-01
Contact: SHI Hui

图像传感型印刷套色控制方法的研究

石绘¹，余文勇²

1.武汉理工大学机电学院，武汉 430070
2.华中科技大学数字制造装备与技术国家重点实验室，武汉 430074

通讯作者: 石绘

Abstract

Abstract: Automatic register control is the core of the whole printers’ control system，it is the key factor for deciding the printing precision.In this paper，a machine vision based register control system is designed to be used in chromatic printing machine.Firstly，the image of color marks is obtained by CCD（Charge Coupled Device）.A Fast Look-Up-Table（FLUT） is established in order to confirm the scope of RGB values of the color mark.The Run Length Encoding（RLE） technique is applied to reconstruct the image and calculate the center of gravity of the color mark.At last，it is compared with the standard position to show whether the registration deviation is exist or not.Experiment proves that it only takes few microseconds to detect twelve colors at once，which is suit to high speed chromatic printing machine.

Key words: machine vision, register control, Fast Look-Up-Table（FLUT）, Run Length Encoding（RLE）

摘要： 套色控制是多色印刷过程中必备的工艺。设计了一种基于机器视觉的印刷套色控制方法。通过摄像头获取独特的色标图案，再建立一种快速查找表，确定各种色标颜色的范围，用行程长编码技术来进行图像重构，并以此来计算图案重心的位置，并与标准位置进行比较，判断套印是否有偏差。实验证明利用该方法能同时检测12种以上颜色，检测周期短，适应于高速印刷机的多色套准。

关键词: 机器视觉, 套色控制, 快速查找表, 行程长编码技术

CLC Number:

TP278

SHI Hui¹，YU Wenyong². Research on machine vision based register control system used in chromatic printing machine[J]. Computer Engineering and Applications, 2011, 47(4): 242-244.

石绘¹，余文勇². 图像传感型印刷套色控制方法的研究[J]. 计算机工程与应用, 2011, 47(4): 242-244.

[1]	PENG Zhaoyong, WU Quan, CHEN Huawei, ZHENG Yue, WANG Shuxiang. Review of Research on Machine Vision Defect Detection Based on Literature Measurement [J]. Computer Engineering and Applications, 2021, 57(4): 28-34.
[2]	CHANG Yawen, ZHAO Dongqing, SHAN Yanhu. Research on Stereo Matching Algorithm Based on Multi-feature Fusion and Adaptive Aggregation [J]. Computer Engineering and Applications, 2021, 57(23): 219-225.
[3]	XU Yangyang，LI Wei，WANG Jie. Optimization of Robot Delay Using Events and Deadline Control [J]. Computer Engineering and Applications, 2021, 57(17): 260-268.
[4]	LI Zhonghai, BAI Qiuyang, WANG Fuming, LIU Hairong. Real-Time Detection System of Rail Surface Defects Based on Semantic Segmentation [J]. Computer Engineering and Applications, 2021, 57(12): 248-256.
[5]	ZHAO Yan, ZUO Baoqi. Analysis on Application of Machine Vision in Fabric Defect Detection [J]. Computer Engineering and Applications, 2020, 56(2): 11-17.
[6]	HE Wenbin, WEI Aiyun, MING Wuyi, JIA Haojie. Survey of Fruit Quality Detection Based on Machine Vision [J]. Computer Engineering and Applications, 2020, 56(11): 10-16.
[7]	MA Dongmei, HE Sansan, YANG Caifeng, YAN Chunman. Semantic Segmentation Based on Convolutional Neural Networks with Feature Fusion [J]. Computer Engineering and Applications, 2020, 56(10): 193-198.
[8]	WANG Yuyuan, XU Jie, JI Weixi. Intelligent Recognition Method for Geometric Features of Parts Based on Supervised Machine Learning [J]. Computer Engineering and Applications, 2019, 55(22): 225-230.
[9]	SUN Weihong1, LI Qiankun1, SHAO Tiefeng1, WU Huiming2. Crack Detection Algorithm of Protective Wall for Piles Based on Machine Vision [J]. Computer Engineering and Applications, 2019, 55(14): 260-265.
[10]	YAO Minghai1, QI Miao2. Research on image dehazing method based on fuzzy cluster [J]. Computer Engineering and Applications, 2018, 54(6): 26-29.
[11]	LI Chao, SUN Jun. Effective method of weld defect detection and classification based on machine vision [J]. Computer Engineering and Applications, 2018, 54(6): 264-270.
[12]	SUN Zhao, XU Zengpu, WANG Yongqiang, ZHOU Congling. Control and compensation of perspective projection error analysis in machine vision measurement [J]. Computer Engineering and Applications, 2018, 54(2): 266-270.
[13]	GUO Ruifeng, YUAN Chaofeng, YANG Liu, PENG Guangyu. Research on measurement of machine vision based on OpenCV [J]. Computer Engineering and Applications, 2017, 53(9): 253-257.
[14]	LIU Junli, WANG Lifeng, KONG Xiuping. Research on coal-rock interface recognition and location measurement [J]. Computer Engineering and Applications, 2017, 53(8): 246-249.
[15]	DUAN Qi1, ZHANG Dongbo1,2, HU Yang1. Feeding system for lacquer?immersing drying?furnace with guide of machine vision [J]. Computer Engineering and Applications, 2017, 53(7): 225-230.

Research on machine vision based register control system used in chromatic printing machine

图像传感型印刷套色控制方法的研究

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics