计算机工程与应用 ›› 2008, Vol. 44 ›› Issue (14): 85-87.

• 研发、设计、测试 • 上一篇    下一篇

采用journal file技术在GAMBIT中实现面链接的自动化

黄章峰1,孙 超2   

  1. 1.天津大学 力学系,天津 300072
    2.天津市翔宇科技贸易学校,天津 300151
  • 收稿日期:2007-10-10 修回日期:2008-01-11 出版日期:2008-05-11 发布日期:2008-05-11
  • 通讯作者: 黄章峰

Realization of automated face-mesh linking in GAMBIT based on journal file technique

HUANG Zhang-feng1,SUN Chao2   

  1. 1.Department of Mechanics,Tianjin University,Tianjin 300072,China
    2.Tianjin Xiangyu Science & Technology Trading School,Tianjin 300151,China
  • Received:2007-10-10 Revised:2008-01-11 Online:2008-05-11 Published:2008-05-11
  • Contact: HUANG Zhang-feng

摘要: 由于周期性边界条件和cooper算法划分网格的需要,在GAMBIT中需要做面链接。为了在用户界面(GUI)中减少设计人员做面链接时的大量手工劳动和重复劳动,为了在文本界面(TUI)中实现面链接自动化,采用自上而下的软件设计方法和journal file技术,设计了一个面链接自动化的模型。利用该模型对43个叶片的前向多翼离心风扇的面链接进行了测试。结果表明,在用户界面(GUI)中鼠标点击次数从187次减少到7次,大大地提高了设计效率;而在文本界面(TUI)中,实现了自动化面链接。该测试在GAMBIT2.3.16通过,测试结果表明该模型可行且有效。

关键词: 面链接, 自动化, 自上而下, GAMBIT, journal file

Abstract: Face-mesh linking is required for periodic boundary condition and cooper meshing scheme in GAMBIT.In order to reduce the massive manual and repeated labor to create a mesh hard-link in Graphical User Interface(GUI),and for the purpose of the realization of automated face-mesh linking in Text User Interface(TUI),an automated facemesh linking model is designed by using Top-Down software design method and journal file technique.Face-mesh linking on a forward-curved multi-blade centrifugal fan with 43 blades is tested by using this model in GAMBIT 2.3.16.Results show that the times of mouse click is reduced from 187 to 7 in GUI,indicating that it dramatically increases the design efficiency,and automated face-mesh linking is realized in TUI,confirming that this model is feasible and effective.

Key words: face-mesh linking, automated, Top-Down, GAMBIT, journal file