计算机工程与应用 ›› 2010, Vol. 46 ›› Issue (35): 55-57.DOI: 10.3778/j.issn.1002-8331.2010.35.016

• 研发、设计、测试 • 上一篇    下一篇

基于FPGA动态部分重构的D/TMR系统设计

刘斐文,姚 睿   

  1. 南京航空航天大学 自动化学院,南京 210016
  • 收稿日期:2010-07-19 修回日期:2010-08-30 出版日期:2010-12-11 发布日期:2010-12-11
  • 通讯作者: 刘斐文

D/TMR design of dynamic part reconfigurable system based on FPGA

LIU Fei-wen,YAO Rui   

  1. Institute of Automation Engineering,Nanjing University of Aeronautics and Astronautics,Nanjing 210016,China
  • Received:2010-07-19 Revised:2010-08-30 Online:2010-12-11 Published:2010-12-11
  • Contact: LIU Fei-wen

摘要: 在空间环境中,系统的可靠性是保障系统正常运行的关键。针对此问题,提出了一种基于FPGA动态部分重构的D/TMR系统设计,正常工作时采用DMR系统,具有较低的面积开销和功耗;当系统出现故障时,利用FPGA部分动态重构技术切换为TMR系统,不需要额外的故障检测与定位电路,就可以保持系统功能的连续性与可靠性。经实验验证,该设计方案具有可行性。

关键词: 三重模件冗余(TMR), 现场可编程门阵列, 动态重构, 总线宏, 部分重构

Abstract: In the space environment,reliability is the key to ensure normal operation of the system.This paper presents a D/TMR design of dynamic part reconfigurable system based on FPGA.DMR system is used to work with lower area overhead and power consumption.When the system fails,it switches to TMR system without additional fault detection and location circuits,using dynamic part of the reconstruction technique.The system can maintain the continuity and reliability of the function.The experimental results show that the design is feasible.

Key words: Triple Modular Redundancy(TMR), Field Programmable Gate Array(FPGA), dynamic reconfiguration, bus macro, partial reconfiguration

中图分类号: