基于点线关系从透视画隐线图重构三维平面立体

计算机工程与应用 ›› 2007, Vol. 43 ›› Issue (20): 90-92.

基于点线关系从透视画隐线图重构三维平面立体

曹秋萍，高满屯，史仪凯

西北工业大学机电学院，西安 710072

收稿日期:1900-01-01 修回日期:1900-01-01 出版日期:2007-07-11 发布日期:2007-07-11
通讯作者: 曹秋萍

Reconstructing 3D structure of planar object from line drawing based on constraints between lines and junctions

CAO Qiu-ping，GAO Man-tun，SHI Yi-kai

Institute of Mechanical and Electrical Engineering of Northwestern Polytechnical University，Xi’an 710072，China

Received:1900-01-01 Revised:1900-01-01 Online:2007-07-11 Published:2007-07-11
Contact: CAO Qiu-ping

摘要/Abstract

摘要： 提出了一种基于点与直线关系从透视投影画隐线图建立平面立体线框模型的新方法。给出了基于点线关系的基本约束，根据透视投影画隐线图中隐含的点与直线位置关系建立约束方程，建立一个线性系统，通过求解该线性系统得到平面立体的三维信息。用算例进行验证，得到了平面立体的三维信息。

关键词: 三维重构, 画隐线图, 平面立体, 线框模型, 透视投影

Abstract: Extracting three-dimensional information of an object from its two-dimensional projection is a primary objective in contemporary computer vision research and thus has been long been studied.In this paper，a new method of reconstruction three-dimensional models from two-dimensional hidden-part-drawn line drawings is proposed.Hidden-part-drawn line drawings researched here are depicted under the perspective projection of a planar object.Some constraints between lines and junctions are given on basis of the location relations of lines and junctions.A linear system is established based on these constraints.The three-dimensional information of a planar object can be obtained by solving the linear system.The feasibility of this method is proved by mathematics and the experiment results.

Key words: 3D reconstruction, hidden-part-drawn line drawing, planar object, framework model, perspective projection

曹秋萍，高满屯，史仪凯. 基于点线关系从透视画隐线图重构三维平面立体[J]. 计算机工程与应用, 2007, 43(20): 90-92.

CAO Qiu-ping，GAO Man-tun，SHI Yi-kai. Reconstructing 3D structure of planar object from line drawing based on constraints between lines and junctions[J]. Computer Engineering and Applications, 2007, 43(20): 90-92.

[1]	孙钊，许增朴，王永强，周聪玲. 机器视觉测量中透视投影误差分析控制与补偿[J]. 计算机工程与应用, 2018, 54(2): 266-270.
[2]	许孝盛1，靳萍2，郑稳2. 室内座椅线框图识别[J]. 计算机工程与应用, 2016, 52(23): 196-202.
[3]	公维理. 基于嵌入式CPU-GPU的高清鱼眼视频实时校正系统[J]. 计算机工程与应用, 2016, 52(14): 172-179.
[4]	汪军，周鸣争，强俊. 基于力反馈设备的文检虚拟触摸鉴定方法[J]. 计算机工程与应用, 2014, 50(9): 130-134.
[5]	王俊，郑永安，史忠科. 基于柱幕投影的飞机大迎角仿真系统实现[J]. 计算机工程与应用, 2014, 50(1): 260-266.
[6]	李新华1，程涛军1，马春1，孙南1，王俊青2. 基于线结构光和足底扫描的足部参数测量研究[J]. 计算机工程与应用, 2013, 49(18): 260-264.
[7]	刘光帅，李柏林，何朝明. 多视三维重构中连续能量模型的凸优化[J]. 计算机工程与应用, 2013, 49(1): 19-22.
[8]	李昌领1，张虹1，朱良峰2. 一种任意多面体剖分成四面体的改进算法[J]. 计算机工程与应用, 2012, 48(25): 20-23.
[9]	郭星1，2，刘政怡1，2，李炜1，2，吴建国2，3. 一种大屏幕人机交互系统的实现方法[J]. 计算机工程与应用, 2012, 48(1): 176-179.
[10]	李畅1，李熙2，朱爱琴1，李奇3. 城市建筑物框架轮廓三维自动重构研究[J]. 计算机工程与应用, 2011, 47(8): 4-6.
[11]	郁钱，孙俊，须文波. 量子粒子群优化算法在摄像机标定中的应用[J]. 计算机工程与应用, 2011, 47(14): 200-203.
[12]	许存禄¹，高佳¹，武国德². Chan-Vese模型下的脑肿瘤图像分割方法[J]. 计算机工程与应用, 2010, 46(9): 155-158.
[13]	余伟巍¹，何飞²，席平¹. 针对脊柱CT图像三维重构MC方法的改进[J]. 计算机工程与应用, 2010, 46(2): 25-28.
[14]	毛先成¹，卢晓琴¹，徐志强². 基于钻孔数据的复杂轮廓线三角面片的重构[J]. 计算机工程与应用, 2009, 45(23): 179-181.
[15]	张桂梅,徐临洪. 基于几何约束识别简单平面立体[J]. 计算机工程与应用, 2008, 44(18): 163-165.