钢结构货架计算分析系统CAD/CAE集成研究

计算机工程与应用 ›› 2012, Vol. 48 ›› Issue (4): 232-235.

钢结构货架计算分析系统CAD/CAE集成研究

王承业，杨竞，陈兵，范云

北京科技大学机械工程学院，北京 100083

收稿日期:1900-01-01 修回日期:1900-01-01 出版日期:2012-02-01 发布日期:2012-04-05

Integration research based on CAD/CAE for computing & analysis system of steel shelf

WANG Chengye, YANG Jing, CHEN Bing, FAN Yun

School of Mechanical Engineering, University of Science & Technology Beijing, Beijing 100083, China

Received:1900-01-01 Revised:1900-01-01 Online:2012-02-01 Published:2012-04-05

摘要/Abstract

摘要： 随着计算机技术的飞速发展，有限元软件在结构分析领域得到了广泛的应用。但因其需要掌握的专业基础知识深，操作流程复杂而很难被普通的货架设计人员在短时期掌握。以数据文件为接口，利用VB进行编程调用有限元软件SAP84的计算模块进行二次开发，实现了钢结构货架通用计算分析系统（简称ASSRS系统）。此系统具有友好、方便、易用的人机交互界面为钢结构货架的合理设计提供了帮助。

关键词: 钢结构货架, SAP84, 二次开发

Abstract: With rapid development of computer technology, a lot of finite element analysis softwares have been widely used in structural fields. Users of these softwares should have deep and professional knowledge background, but using methods of these softwares is so complex and it is difficult for ordinary shelf designers to master them in short time. In this paper, a kind of new structural analysis software is developed, the interface data file is used in the new system, and finite element solver of SAP84 is called by VB tool through programming for a secondary development of the calculation module. It develops a general calculation of steel shelf system successfully. This system has a friendly, convenient and easy using interactive interface, and it is helpful for engineers to design steel shelves.

Key words: steel structure racks, SAP84, secondary development

王承业，杨竞，陈兵，范云. 钢结构货架计算分析系统CAD/CAE集成研究[J]. 计算机工程与应用, 2012, 48(4): 232-235.

WANG Chengye, YANG Jing, CHEN Bing, FAN Yun. Integration research based on CAD/CAE for computing & analysis system of steel shelf[J]. Computer Engineering and Applications, 2012, 48(4): 232-235.

[1]	吴石，王正春，刘献礼，王义文. 面向模具陡峭区的接触式测量误差补偿方法[J]. 计算机工程与应用, 2015, 51(24): 238-243.
[2]	胡斯博1，2，丁祎1，朱德霞1，胡平2. 基于CATIA/CAA的车身主断面参数测量工具开发[J]. 计算机工程与应用, 2014, 50(20): 249-253.
[3]	夏毅敏1，卞章括1，暨智勇1，2，林赉贶1，罗德志3. 复合式土压平衡盾构刀盘CAD系统开发[J]. 计算机工程与应用, 2012, 48(36): 64-69.
[4]	方水良，付伟. PDM组件开发及其在多种应用软件中的集成[J]. 计算机工程与应用, 2011, 47(6): 58-61.
[5]	李向伟^1，2，兆文忠¹. I-DEAS二次开发研究及在焊缝疲劳仿真中的应用[J]. 计算机工程与应用, 2011, 47(4): 232-235.
[6]	张梁娟朱昌明方晓旻陈占清. 多平台集成的金属结构性能分析和数据管理系统[J]. 计算机工程与应用, 2007, 43(5期): 93-95.
[7]	李爱平胡永亮刘雪梅. 基于Inventor的三维参数化部件库系统的开发方法[J]. 计算机工程与应用, 2007, 43(3期): 84-84.