复合式土压平衡盾构刀盘CAD系统开发

计算机工程与应用 ›› 2012, Vol. 48 ›› Issue (36): 64-69.

复合式土压平衡盾构刀盘CAD系统开发

夏毅敏1，卞章括1，暨智勇1，2，林赉贶1，罗德志3

1.中南大学高性能复杂制造国家重点实验室，长沙 410083
2.中国铁建重工集团有限公司，长沙 410100
3.北京沃利帕森工程技术有限公司，北京 100015

出版日期:2012-12-21 发布日期:2012-12-21

Development of cutter head CAD system for composite EPB shield

XIA Yimin1, BIAN Zhangkuo1, JI Zhiyong1，2, LIN Laikuang1, LUO Dezhi3

1.State Key Lab of High Performance Complex Manufacturing, Central South University, Changsha 410083, China
2.China Railway Construction Heavy Industry Co. Ltd, Changsha 410100, China
3.Beijing WorleyParsons Engineering and Technology Co. Ltd, Beijing 100015, China

Online:2012-12-21 Published:2012-12-21

摘要/Abstract

摘要： 在结合盾构刀盘构型、开口和刀具布置规律等理论基础上，以三维软件SolidWorks为开发平台，以Visual Basic作为开发工具，开发了一种复合式土压平衡盾构刀盘CAD系统。该CAD系统采用编程法与尺寸驱动法两种开发方式，设计了刀盘选型模块、开口设计模块、刀具选型模块和刀具布置模块等八个模块，实现对复合式土压平衡盾构刀盘、刀具进行三维参数化优化设计。针对某地铁施工工程需求，应用所开发的复合式土压平衡盾构刀盘CAD系统，设计了直径6.28 m，开口率为32%，装配有滚刀35把，正面刮刀40把，边缘刮刀8把的刀盘。

关键词: 复合式土压平衡盾构, 刀盘, 计算机辅助设计（CAD）系统, 二次开发

Abstract: Based on the theories of shield cutterhead configuration, aperture ratio and cutter arrangement law etc, a cutterhead CAD system for the composite EPB shield is developed. The 3D software SolidWorks is serviced as a development platform and Visual Basic as a development tool. The cutter head CAD system mainly adopts programming method and size-driven method, including cutterhead type selection module, aperture design module, cutter type selection module and cutter layout module etc. It accomplishes the parametric optimized design for cutter head and cutters. Furthermore, according to engineering requirements of a subway construction, a cutter head is designed by the developed cutterhead CAD system. Its diameter is 6.28 m and aperture ratio is 32%. It also has 35 dics cutters, 40 front scrapers and 8 edge scrapers.

Key words: composite Earth Pressure Balance（EPB） shield, cutter head, Computer Aided Design（CAD） system, secondary development

夏毅敏1，卞章括1，暨智勇1，2，林赉贶1，罗德志3. 复合式土压平衡盾构刀盘CAD系统开发[J]. 计算机工程与应用, 2012, 48(36): 64-69.

XIA Yimin1, BIAN Zhangkuo1, JI Zhiyong1，2, LIN Laikuang1, LUO Dezhi3. Development of cutter head CAD system for composite EPB shield[J]. Computer Engineering and Applications, 2012, 48(36): 64-69.

[1]	吴石，王正春，刘献礼，王义文. 面向模具陡峭区的接触式测量误差补偿方法[J]. 计算机工程与应用, 2015, 51(24): 238-243.
[2]	胡斯博1，2，丁祎1，朱德霞1，胡平2. 基于CATIA/CAA的车身主断面参数测量工具开发[J]. 计算机工程与应用, 2014, 50(20): 249-253.
[3]	夏毅敏，吴元，吴峰，刘文华，林赉贶. 某隧道盾构刀盘仿真与力学性能研究[J]. 计算机工程与应用, 2013, 49(11): 248-251.
[4]	王承业，杨竞，陈兵，范云. 钢结构货架计算分析系统CAD/CAE集成研究[J]. 计算机工程与应用, 2012, 48(4): 232-235.
[5]	方水良，付伟. PDM组件开发及其在多种应用软件中的集成[J]. 计算机工程与应用, 2011, 47(6): 58-61.
[6]	李向伟^1，2，兆文忠¹. I-DEAS二次开发研究及在焊缝疲劳仿真中的应用[J]. 计算机工程与应用, 2011, 47(4): 232-235.
[7]	张梁娟朱昌明方晓旻陈占清. 多平台集成的金属结构性能分析和数据管理系统[J]. 计算机工程与应用, 2007, 43(5期): 93-95.
[8]	李爱平胡永亮刘雪梅. 基于Inventor的三维参数化部件库系统的开发方法[J]. 计算机工程与应用, 2007, 43(3期): 84-84.