计算机工程与应用 ›› 2012, Vol. 48 ›› Issue (1): 72-75.

• 研发、设计、测试 • 上一篇    下一篇

EMCCD时序发生器的VHDL设计

陈小明,李彬华   

  1. 昆明理工大学 信息工程与自动化学院,昆明 650500
  • 收稿日期:1900-01-01 修回日期:1900-01-01 出版日期:2012-01-01 发布日期:2012-01-01

VHDL design of EMCCD timing generator

CHEN Xiaoming, LI Binhua   

  1. Faculty of Information Engineering and Automation, Kunming University of Science and Technology, Kunming 650500, China
  • Received:1900-01-01 Revised:1900-01-01 Online:2012-01-01 Published:2012-01-01

摘要: 具有电子倍增功能的CCD图像传感器在微光探测与成像领域获得了极大的成功。分析了该TC285SPD EMCCD用于微光成像时的控制要求,并结合模拟前端信号处理器AD9845B的时序控制要求,采用VHDL语言进行编程,实现了对该EMCCD的驱动控制。详细介绍了EMCCD时序发生器的VHDL设计方法和实现过程,在Quartus II环境下给出了系统的仿真结果,并对结果进行了分析讨论。

关键词: 电子倍增电荷耦合器件(EMCCD), 成像系统, 现场可编程门阵列(FPGA), 超高速集成电路硬件描述语言(VHDL)编程, 仿真

Abstract: The CCD image sensor with electron multiplication is a great success in low-light-level detection and imaging applications. This paper analyzes control requirements of the TC285SPD EMCCD used in low-light-level imaging. Combining with the timing control demands of the analog front end AD9845B, a timing generator is implemented to drive the EMCCD by VHDL. The VHDL design and implementation process of the timing generator are presented. In development environment of the Quartus II, some simulation results of the system are given and have been analyzed in the end.

Key words: Electron Multiplying Charge Coupled Device(EMCCD), imaging system, Field-Programmable Gate Array(FPGA), Very-High-Speed Integrated Circuit Hardware Description Language(VHDL) programming, simulation