一种基于控制点自动提取的图像畸变校正算法

计算机工程与应用 ›› 2007, Vol. 43 ›› Issue (2): 214-214.

一种基于控制点自动提取的图像畸变校正算法

郭永刚,葛庆平,冯平，姜长胜

首都师范大学信息工程学院

收稿日期:2006-01-18 修回日期:1900-01-01 出版日期:2007-01-11 发布日期:2007-01-11
通讯作者: 郭永刚 guoyonggang

An Image Geometry Calibration Method Based on Automated Acquirement of Control Points

YongGang Guo,,

首都师范大学信息工程学院

Received:2006-01-18 Revised:1900-01-01 Online:2007-01-11 Published:2007-01-11
Contact: YongGang Guo

摘要/Abstract

摘要： 在机器视觉应用中，摄像机光学系统产生的图像存在不同程度的几何畸变。为了提高图像在做定量分析时的准确性,必须对这一类畸变进行修正。在基于控制点的校正方法基础之上，研究了一种将图像分片，利用模板自动提取控制点亚象素坐标，分片校正的快速算法。实际应用表明,该方法是可靠有效的。

关键词: 几何畸变, 控制点自动提取, 亚象素坐标

Abstract: In the machine vision application, geometrical distortion in optical lens imaging is inevitable. They must be corrected before quantitative measurements.A geometric calibration algorithm is proposed in this paper.The image is firstly divided into rectangles, the control points is recognised and computed automatically, rhen an appropriate first-order polynomial is used to approximate the high-order polynomial within each rectangle. Practical application shows that the method is reliable and effective.

Key words: Geometry Calibration, Automated Acquirement of Control Points, Subpixel coordinates

郭永刚,葛庆平,冯平，姜长胜. 一种基于控制点自动提取的图像畸变校正算法[J]. 计算机工程与应用, 2007, 43(2): 214-214.

YongGang Guo,,. An Image Geometry Calibration Method Based on Automated Acquirement of Control Points[J]. Computer Engineering and Applications, 2007, 43(2): 214-214.

[1]	范勇，张佳成，陈念年，周敬滨，王俊波. 图像几何畸变校正方法[J]. 计算机工程与应用, 2009, 45(29): 194-197.
[2]	马广彬章文毅陈甫. 图像几何畸变精校正研究[J]. 计算机工程与应用, 2007, 43(9): 45-48.
[3]	郭丙轩¹，王铁程¹，刘波². 基于网格的数码相机数字化纠正几何畸变算法[J]. 计算机工程与应用, 2007, 43(19): 234-236.