基于视觉的轮毂磨抛初始点寻找与对准控制

doi:10.3778/j.issn.1002-8331.2206-0321

摘要/Abstract

摘要： 在轮毂磨抛机器人系统中，由于轮毂形状各异且表面结构复杂，传统的接触式传感器不适用于磨抛初始点的对准。因此提出一种基于视觉的轮毂初始点对准方法。整个初始点对准过程包括三个阶段：第一阶段采集轮毂图像，得到轮毂中心坐标与螺栓孔中心坐标。第二阶段，根据多个螺栓孔中心坐标与轮毂中心坐标，计算出当前轮毂磨抛点到目标初始点所需的旋转角度。第三阶段，基于模糊控制算法，设计对准控制器，以实现初始点对准控制。通过实验对所提出方法的有效性和精度进行了验证，实验结果表明轮毂磨抛初始点对准的方法是可行的。

关键词: 机器视觉, 轮毂磨抛系统, 模糊控制, 初始点对准

Abstract: In the wheel hub grinding and polishing robot system, due to the different shapes of the hub and the complex surface structure, the traditional contact sensor is not suitable for the alignment of the initial point of grinding and polishing. Therefore, a vision-based initial point alignment method of the hub is proposed. The entire initial point alignment process includes three stages：the first stage collects the image of the hub, and obtains the center coordinates of the hub and the center of the bolt hole. In the second stage, according to the center coordinates of multiple bolt holes and the center coordinates of the hub, the rotation angle required by the current wheel hub grinding and polishing point to the target initial point is calculated. In the third stage, based on the fuzzy control algorithm, the alignment controller is designed to realize the initial point alignment control. Finally, the effectiveness and accuracy of the proposed method are verified by experiments. The experimental results show that the method of aligning the initial point of wheel hub grinding and polishing is feasible.

Key words: machine vision, wheel hub grinding and polishing system, fuzzy control, initial point alignment

戴伊宁, 方灶军, 潘聪. 基于视觉的轮毂磨抛初始点寻找与对准控制[J]. 计算机工程与应用, 2023, 59(18): 309-315.

DAI Yining, FANG Zaojun, PAN Cong. Vision-Based Wheel Hub Initial Point Finding and Alignment Control[J]. Computer Engineering and Applications, 2023, 59(18): 309-315.

参考文献

[1] ZHU D，FENG X，XU X，et al.Robotic grinding of complex components：a step towards efficient and intelligent machining-challenges，solutions，and applications[J].Robotics and Computer-Integrated Manufacturing，2020，65：101908.
[2] TIAN F，LI Z，LV C，et al.Polishing pressure investigations of robot automatic polishing on curved surfaces[J].The International Journal of Advanced Manufacturing Technology，2016，87（1）：639-646.
[3] KHARIDEGE A，DU T T，ZHANG Y J.A practical approach for automated polishing system of free-form surface path generation based on industrial arm robot[J].The International Journal of Advanced Manufacturing Technology，2017，93（9）：3921-3934.
[4] LIU Z，XIE B，WANG A.The research of the precise aspheric wheeled polishing technology[C]//Sixth International Conference on Optical and Photonic Engineering（icOPEN 2018），2018：739-745.
[5] LEI T，RONG Y，HUI W，et al.A review of vision-aided robotic welding[J].Computers in Industry，2020，123.
[6] HE Y，XU Y，CHEN Y，et al.Weld seam profile detection and feature point extraction for multi-pass route planning based on visual attention model[J].Robotics and Computer-Integrated Manufacturing，2016，37：251-261.
[7] FAN J，JING F，YANG L，et al.An initial point alignment method of narrow weld using laser vision sensor[J].The International Journal of Advanced Manufacturing Technology，2019，102（1）：201-212.
[8] 王小刚，王中任，刘海生.熔滴—焊缝同步视觉焊接偏差测定方法[J].计算机集成制造系统，2022，28（5）：1352-1360.
WANG X G，WANG Z R，LIU H S.Measurement method for simultaneous visual welding deviation of droplet-weld seam[J].Computer Integrated Manufacturing System，2022，28（5）：1352-1360.
[9] FANG Z，LI J，ZHANG C，et al.Vision-based initial point alignment control for the wheel hubs in the robotic polishing system[J].The International Journal of Advanced Manufacturing Technology，2020，111（5）：1471-1481.
[10] 丁建军，苏通，朱勇杰，等.基于Halcon的汽车连杆工件WD-2的图像处理方法研究[J].计算机应用与软件，2022，39（1）：225-230.
DING J J，SU T，ZHU Y J，et al.An image processing method of automobile connecting rod WD-2 based on Halcon[J].Computer Applications and Software，2022，39（1）：225-230.
[11] CANNY J.A computational approach to edge detection[J].IEEE Transactions on Pattern Analysis and Machine Intelligence，1986，8（6）：679-698.
[12] 徐衍鲁，马燕.改进Canny算子的图像边缘检测算法[J].福建电脑，2019，35（5）：5-7.
XU Y L，MA Y.An edge detection algorithm based on improved Canny operator[J].Journal of Fujian Computer，2019，35（5）：5-7.
[13] 郭斯羽，吴延冬.去除离群点的改进椭圆拟合算法[J].计算机科学，2022，49（4）：188-194.
GUO S Y，WU Y D.Improved ellipse fitting algorithm with outlier removal[J].Computer Science，2022，49（4）：188-194.
[14] 陈璐，关立文.基于改进Zernike矩的亚像素钻铆圆孔检测方法[J].清华大学学报（自然科学版），2019，59（6）：438-444.
CHEN L，GUAN L W.Subpixel drilling and riveting circular hole detection method based on improved Zernike moment[J].Journal of Tsinghua University（Science and Technology），2019，59（6）：438-444.
[15] 闫文才，白瑞林，刘子腾，等.焊接机器人曲线焊缝的自动跟踪控制[J].计算机工程与应用，2015，51（5）：222-227.
YAN W C，BAI R L，LIU Z T，et al.Automatically cyrve sean tracking control for welding robot[J].Computer Engineering and Applications，2015，51（5）：222-227.