计算机工程与应用 ›› 2011, Vol. 47 ›› Issue (4): 242-244.DOI: 10.3778/j.issn.1002-8331.2011.04.068

• 工程与应用 • 上一篇    下一篇

图像传感型印刷套色控制方法的研究

石 绘1,余文勇2   

  1. 1.武汉理工大学 机电学院,武汉 430070
    2.华中科技大学 数字制造装备与技术国家重点实验室,武汉 430074
  • 收稿日期:2009-06-01 修回日期:2009-07-20 出版日期:2011-02-01 发布日期:2011-02-01
  • 通讯作者: 石 绘

Research on machine vision based register control system used in chromatic printing machine

SHI Hui1,YU Wenyong2   

  1. 1.School of Mechanical and Electronic Engineering,Wuhan University of Technology,Wuhan 430070,China
    2.State Key Lab of Digital Manufacturing Equipment & Technology,Huazhong University of Science and Technology,Wuhan 430074,China
  • Received:2009-06-01 Revised:2009-07-20 Online:2011-02-01 Published:2011-02-01
  • Contact: SHI Hui

摘要: 套色控制是多色印刷过程中必备的工艺。设计了一种基于机器视觉的印刷套色控制方法。通过摄像头获取独特的色标图案,再建立一种快速查找表,确定各种色标颜色的范围,用行程长编码技术来进行图像重构,并以此来计算图案重心的位置,并与标准位置进行比较,判断套印是否有偏差。实验证明利用该方法能同时检测12种以上颜色,检测周期短,适应于高速印刷机的多色套准。

关键词: 机器视觉, 套色控制, 快速查找表, 行程长编码技术

Abstract: Automatic register control is the core of the whole printers’ control system,it is the key factor for deciding the printing precision.In this paper,a machine vision based register control system is designed to be used in chromatic printing machine.Firstly,the image of color marks is obtained by CCD(Charge Coupled Device).A Fast Look-Up-Table(FLUT) is established in order to confirm the scope of RGB values of the color mark.The Run Length Encoding(RLE) technique is applied to reconstruct the image and calculate the center of gravity of the color mark.At last,it is compared with the standard position to show whether the registration deviation is exist or not.Experiment proves that it only takes few microseconds to detect twelve colors at once,which is suit to high speed chromatic printing machine.

Key words: machine vision, register control, Fast Look-Up-Table(FLUT), Run Length Encoding(RLE)

中图分类号: