嵌入式喷码机系统的设计与开发

doi:10.3778/j.issn.1002-8331.1606-0252

计算机工程与应用 ›› 2017, Vol. 53 ›› Issue (24): 226-232.DOI: 10.3778/j.issn.1002-8331.1606-0252

嵌入式喷码机系统的设计与开发

王宏文，郭章亮，宁乐，雷盼雲

河北工业大学控制科学与工程学院，天津 300130

出版日期:2017-12-15 发布日期:2018-01-09

Design and development of embedded inkjet printer system

WANG Hongwen, GUO Zhangliang, NING Le, LEI Panyun

College of Control Science and Engineering, Hebei University of Technology, Tianjin 300130, China

Online:2017-12-15 Published:2018-01-09

摘要/Abstract

摘要： 针对现代生产流水线作业高效、稳定特点，设计了一种基于S3C6410处理器和WINCE6.0系统为核心的新型喷码机控制系统。采用模块化的思想对喷码机的电源电路进行了设计并完成了其他外围电路的硬件实现。利用Platform Builder完成了XJ128喷头驱动的开发和DM9000A网卡驱动的集成设计并定制了WINCE6.0操作系统。通过VS2005采用多线程编程技术进行了人机界面开发。实验结果表明该系统运行稳定可靠，喷印图像清晰，满足了生产厂商对高效率喷码机系统的要求。

关键词: S3C6410处理器, WINCE6.0系统, 喷码机控制系统, XJ128喷头驱动, 人机界面

Abstract: According to the efficient and stable characteristics of modern production assembly line work, a kind of new inkjet printer control system is designed which uses S3C6410 processor and WINCE6.0 operating system as its core. By adopting the idea of modularization, the inkjet printer power supply circuit is designed and finished the design of other peripheral circuit. Using the Platform Builder, it completes the development of the XJ128 print-head driver and the integrated design of the DM9000A driver, meanwhile the WINCE6.0 operating system is customized. VS2005 software is used for human-machine interface development by adopting multithreaded programming technique. The experimental results prove that the inkjet printer control system runs stable and reliable, the image printed is very clear, meet the requirement of the manufacturer.

Key words: S3C6410 processor, WINCE6.0 operating system, inkjet printer control system, the XJ128 print-head driver, human-machine interface

王宏文，郭章亮，宁乐，雷盼雲. 嵌入式喷码机系统的设计与开发[J]. 计算机工程与应用, 2017, 53(24): 226-232.

WANG Hongwen, GUO Zhangliang, NING Le, LEI Panyun. Design and development of embedded inkjet printer system[J]. Computer Engineering and Applications, 2017, 53(24): 226-232.

[1]	冯纾，王军锋，蔡勇，冯登明，王文军. 低光照度下人机界面背景色眼动分析评价研究[J]. 计算机工程与应用, 2020, 56(4): 262-267.
[2]	汪阳雄，张向文. 基于MK60DN512ZVLQ10纯电动汽车BMS上位机模块设计与实现[J]. 计算机工程与应用, 2018, 54(7): 232-238.
[3]	邓丽1，2，余隋怀1. 基于Fuzzy AHP的司钻控制房人机界面评价[J]. 计算机工程与应用, 2014, 50(4): 231-235.
[4]	石坚1，白瑞林1，邹骏宇2，马涛1. Android多点触摸屏输入系统的设计与实现[J]. 计算机工程与应用, 2012, 48(28): 66-70.
[5]	盛金根，李永建，孙鹏. 一种信息呈现方式及其搜索效率的眼动研究[J]. 计算机工程与应用, 2012, 48(1): 30-32.
[6]	张成兰1，陈迪军2，帅金荣1，马杰1，周纯杰1. 基于Linux的人机界面可重构通信设计与实现[J]. 计算机工程与应用, 2011, 47(7): 61-63.
[7]	纪连恩¹,路游¹,张凤军². 基于混合现实交互界面的下颌运动仿真系统[J]. 计算机工程与应用, 2009, 45(16): 169-171.

嵌入式喷码机系统的设计与开发

Design and development of embedded inkjet printer system

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 7

编辑推荐

Metrics