扁豆病害叶片的病斑剥离分割

计算机工程与应用 ›› 2014, Vol. 50 ›› Issue (23): 181-184.

扁豆病害叶片的病斑剥离分割

李学俊1，赵礼良2

1.安徽大学计算机科学与技术学院，合肥 230601
2.安徽大学计算智能与信号处理重点实验室，合肥 230039

出版日期:2014-12-01 发布日期:2014-12-12

Image segmentation of diseased lentil leaves for disease speckle

LI Xuejun1, ZHAO Liliang2

1.School of Computer Science and Technology, Anhui University, Hefei 230601, China
2.Intelligent Computing and Signal Processing Laboratory, Anhui University, Hefei 230039, China

Online:2014-12-01 Published:2014-12-12

摘要/Abstract

摘要： 传统的分割方法针对目标和背景灰度值差距大的图像能得到较好的分割效果，但在对正常叶片和病斑灰度值相似度高的扁豆病害叶片图像分割时，难以得到理想的目标病斑。针对该问题，提出了一种适合正常叶片和病斑相似度高的图像剥离分割方法。该方法包括初始分割和二次分割两个步骤。初始分割是基于样本图片的彩色梯度图，采用最大类间标准方差与分水岭相结合的算法获得病斑粗略区域。二次分割是对粗略目标区域进行模糊C聚类分割得到目标病斑。实验结果表明，该剥离分割算法能提高病斑分割精确度，较好地分割出病斑目标。

关键词: 扁豆病害叶片, 图像分割, 彩色梯度, 分水岭, 模糊C聚类

Abstract: Traditional segmentation methods can obtain better result for these images which have distinct difference between the goal and background area. However these methods are difficult to obtain ideal disease speckle for diseased lentil leave images which have minor difference among normal leaves and disease speckles. So in this paper, it proposes a method that is suitable for diseased lentil leave images. This method has two stages including initial segmentation and secondary segmentation. Color gradient graph of these images is computed, then the Otsu algorithm is applied to eliminate lower gradient. Watershed algorithm is used to pre-segment the images, then a rough target zone based on zone area features is gained. FCM algorithm is applied to rough target zone. By analyzing difference between green alley of disease speckle and normal leaves, disease speckle is acquired. Experimental results show good effect of segmenting disease speckle with this method.

Key words: lentil diseased leaves, image segmentation, color gradient, watershed algorithm, Fuzzy C-Means（FCM）

李学俊1，赵礼良2. 扁豆病害叶片的病斑剥离分割[J]. 计算机工程与应用, 2014, 50(23): 181-184.

LI Xuejun1, ZHAO Liliang2. Image segmentation of diseased lentil leaves for disease speckle[J]. Computer Engineering and Applications, 2014, 50(23): 181-184.

[1]	赵阳，张俊华. 多尺度特征融合的脊柱X线图像分割方法[J]. 计算机工程与应用, 2021, 57(8): 214-219.
[2]	潘沛鑫，潘中良. 结合显著性的主动轮廓图像分割[J]. 计算机工程与应用, 2021, 57(8): 225-230.
[3]	董鹏，周烽，赵悰悰，王亚飞，米泽田，付先平. 基于双目视觉的水下海参尺寸自动测量方法[J]. 计算机工程与应用, 2021, 57(8): 271-278.
[4]	史春天，曾艳阳，侯守明. 群体智能算法在图像分割中的应用综述[J]. 计算机工程与应用, 2021, 57(8): 36-47.
[5]	彭璟，罗浩宇，赵淦森，林成创，易序晟，陈少洁. 深度学习下的医学影像分割算法综述[J]. 计算机工程与应用, 2021, 57(3): 44-57.
[6]	马庆禄，唐小垚. 融合时域和分水岭信息的车辆检测算法[J]. 计算机工程与应用, 2021, 57(24): 227-233.
[7]	刘锐，丁辉，尚媛园，邵珠宏，刘铁. COVID-19医学影像数据集及研究进展[J]. 计算机工程与应用, 2021, 57(22): 15-27.
[8]	周绍光，吴昊，赵婵娟，陈仁喜. 利用同质区特性的高光谱图像迁移学习分类[J]. 计算机工程与应用, 2021, 57(21): 224-233.
[9]	丁成，翁理国，夏旻，崔逸尘，钱俊豪，刘佳. 多注意力机制网络卫星图像分割算法[J]. 计算机工程与应用, 2021, 57(2): 223-229.
[10]	李振强，王树才，赵世达，白宇. 改进DeepLabv3+和XGBoost的羊骨架切割方法[J]. 计算机工程与应用, 2021, 57(18): 263-269.
[11]	孙玮婕，杨军. 改进的简单非迭代聚类的遥感影像分割研究[J]. 计算机工程与应用, 2021, 57(13): 185-192.
[12]	杨勇，郭玲，叶阳东. 全变分流边与M2GGD相结合的自然图像分割方法[J]. 计算机工程与应用, 2021, 57(11): 202-210.
[13]	鲁圆圆，冯浩，李靖. 结合分布度量统计建模的主动轮廓图像分割[J]. 计算机工程与应用, 2020, 56(7): 228-233.
[14]	张姝洁，郑利平，韩清，张晗. 从图片到衣服：快速虚拟角色服饰生成方法[J]. 计算机工程与应用, 2020, 56(7): 234-239.
[15]	李超超，张远东，王昌龙. 圆形植物识别定位的HSV模型研究[J]. 计算机工程与应用, 2020, 56(6): 220-223.