基于Inventor的三维参数化部件库系统的开发方法

计算机工程与应用 ›› 2007, Vol. 43 ›› Issue (3): 84-84.

基于Inventor的三维参数化部件库系统的开发方法

李爱平胡永亮刘雪梅

同济大学机械工程学院同济大学现代制造技术研究所

收稿日期:2006-07-19 修回日期:1900-01-01 出版日期:2007-01-21 发布日期:2007-01-21
通讯作者: 胡永亮

A methodology for building 3D parameterized component library system based on Inventor

Yongliang Hu Xuemei Liu

Received:2006-07-19 Revised:1900-01-01 Online:2007-01-21 Published:2007-01-21
Contact: Yongliang Hu

摘要/Abstract

摘要： 介绍了基于Autodesk Inventor的部件库的体系结构和实现方法。把部件库系统分为零件库和部件库两层结构，通过部件模型确定组成部件的组成零件及其装配关系，通过数据表和程序确定零件的规格。此方法解决了常用三维CAD软件不直接支持装配件参数驱动的问题，使得基于三维CAD软件创建部件库系统成为可能。文中所述部件库系统是使用VC++对Inventor进行二次开发而得到的。同时，该方法也适用于其它常用三维CAD软件。

关键词: 三维部件库, 参数化部件库, Inventor二次开发

Abstract: A methodology for building three-dimensional (3D) parametric component library based on Autodesk Inventor is introduced. Under this methodology the system is divided into two levels which are part library level and component library level. Determining the structure of a component through its assembly model and dimension of each composing part through database tables and program, this methodology solves the problem that commonly used 3D CAD software dose not directly support parametric dimensional driving for assembly, and therefore enables the building of component library system based on 3D CAD software. The system is developed based on Autodesk Inventor with VC++. In addition, this methodology also applies to other commonly used 3D CAD software.

Key words: 3D Component Library, Parametric Component Library, Secondary Development on Inventor

李爱平胡永亮刘雪梅. 基于Inventor的三维参数化部件库系统的开发方法[J]. 计算机工程与应用, 2007, 43(3): 84-84.

Yongliang Hu Xuemei Liu. A methodology for building 3D parameterized component library system based on Inventor[J]. Computer Engineering and Applications, 2007, 43(3): 84-84.