Computer Engineering and Applications ›› 2013, Vol. 49 ›› Issue (13): 89-92.

Previous Articles     Next Articles

Applications of combined spectrogram to frequency-hopping signal analysis

ZENG Xiangfeng1, YANG Yuhong1, CUI Penghui1, WEN Zhou2   

  1. 1.Institute of Information Engineering, Information Engineering University, Zhengzhou 450002, China
    2.Unit 65021 of PLA, China
  • Online:2013-07-01 Published:2013-06-28

组合谱图法在跳频信号时频分析中的应用

曾祥峰1,杨育红1,崔鹏辉1,温  洲2   

  1. 1.信息工程大学 信息工程学院,郑州 450002
    2.中国人民解放军65021部队

Abstract: A new combined spectrogram method is proposed for Frequency-Hopping(FH) signal analysis, which adopts two windows with different length to analyze the signals and gets two kind of results separately with better time-resolution and better frequency-resolution. By combined the advantage of two kinds of results, the time-frequency resolution is improved, and the improvement is proved by theoretical analysis and simulation results. At last, the performance in hop rate estimating with Gauss white noise has been given by simulation, the results show that the SNR(Signal Noise Ratio) performance enhances about 3 dB.

Key words: Frequency-Hopping(FH) signal, time-frequency analysis, combined spectrogram, parameter estimation

摘要: 提出了一种应用于跳频信号的组合式谱图时频分析方法,采用两种不同长度的窗函数对信号进行时频分析,分别得到具有较好频率和时间分辨率的两组分析结果;结合两组结果的优点,提高了原谱图法的时频分辨率,并通过理论分析和仿真结果予以证明。在高斯白噪声条件下,对组合谱图法在跳速估计中的性能进行仿真,结果表明该算法的信噪比性能较谱图法提高了3 dB左右。

关键词: 跳频信号, 时频分析, 组合谱图法, 参数估计